Specifications

16. If the instrument is fitted with Option 4X, press the Appl key, select:
CHANGE APPLICATION SETUP
MEASUREMENT TYPE TRANSMISSION AND REFLECTION
NOISE FIGURE
NOISE FIGURE SETUP
ENR TABLE OPERATIONS
LOAD ENR TABLE
FROM FLOPPY DISK
17. Load the files that were saved to the floppy disk in Step 9 (Vendor
ENR Table, Internal ENR Extension Table, and optional External
ENR Extension Table).
NOTE
It is not sufficient to simply save these files to the hard drive.
They must be loaded using the method described in this
section.
The battery replacement operation is complete
REMOVAL AND REPLACEMENT CPU ASSEMBLY
MS462XX MM 7-17