Specifications

7-3 POWER
DISTRIBUTION
UNIT
The PDU is mounted inside the main cabinet and secured using two
screws through the rear panel.
Tools Required: Phillips screwdriver
Procedure: 1. Remove the AC power cord.
2. Remove the front panel (refer to Section 7-2).
3. Remove the two Phillips screws that secure the PDU to the system
back panel.
4. Carefully pull the PDU straight out from the front of the unit, as
shown in Figure 7-6 on the following page.
REMOVAL AND REPLACEMENT POWER DISTRIBUTION UNIT
MS462XX MM 7-9
Figure 7-5. PDU Mounting Screws
PDU MOUNTING SCREWS (2)