Datasheet

Home / Temperature probes / Model ST
Application / Technical guide / Request catalogue [e-mail]
Model ST series
Flat leaf Temperature Probes
Model ST series is the unique sensor of ribbon type for temperature
measurement. Model ST series will be used to utilization in various
ways.
Typical Probes of ST series
Model
ST-11K-015-TS1-ANP
Model
ST-24K-015-GW1-ANP
Max.Temp. Accuracy Response time Durability
210°C
±1.2°C
(100°C Surface)
2.0s S
Max.Temp. Accuracy Response time Durability
400°C
±1.4°C
(100°C Surface)
8.0s S
*Max. Temp. 350°C(Over 150mm tape length)
Specifications
Accuracy
Open
All coating
±1.2°C(at 100°C)
±1.4°C(at 100°C)
Response time
Open
All coating
2s
8s
Durability
Special application
(can not evaluate)
Max.Temp.
Low temp.
High temp.
210°C
400°C*
1.Sharp or Flat
-1 Sharp
-2 Flat
2.Coating type
1 Open 210°C
2 All coating 210°C
3 Open 400°C
4 All coating 400°C
3.Thermocouple
K Chromel-Alumel
E Chromel-Constantan
4.Tape length
003 30mm
005 50mm
008 80mm
010 100mm
--- ----------
050 500mm
--- ----------
200 2000mm
5.Cable type
-TS For ST-*1,ST-*2
-GW For ST-*3,ST-*4
1.Sharp or flat
You can choice Sharp and flat as below.
2.Coating type
You can choice Coating typee as below.
Temperature probes Model ST
2004-02-12http://www.anritsu-meter.com/probe/model_st.htm
5.Cable length
1 1m
1.5 1.5m
2 2m
2.5 2.5m
-- ------------
6.plug
-ANP P plug
-W Without plug
2.Tape length
You can choice Tape length as below.
003: 30mm
005: 50mm
008: 80mm
010: 100mm
015: 150mm
020: 200mm
025: 250mm
030: 300mm
035: 350mm
040: 400mm
045: 450mm
050: 500mm
060: 600mm
070: 700mm
080: 800mm
090: 900mm
100: 1000mm
150: 1500mm
200: 2000mm