User Manual

Wireless NVR Kit Manual
44
Permission explanation：
Video playback：You can retrieve and playback the recording data stored in the hard disk.
Video backup：You can back up the video data that stored in the hard disk by usb flash disk.
PTZ control：Control the direction of the movement, PTZ cruise.
Output volume：Controls the audio output volume size.
Manual recording：You can manually open the video at any time.
System setup：Contains general setup, video setup, network setup, channel setup and system management.
Split screen selection: Single screen and multi-screen switch.
Channel adjustment：You can adjust the brightness, hue, saturation, and contrast of the screen.
Setup Wizard：Start-up and guide user to make basic setups。
System mode：Set the system mode.
Remote viewing：Can be previewed remotely.
Configuration：Configure device parameters when logging on remotely.
Remote video playback：You can play back video data remotely.
Delete users
Steps：
1, Right click the main interface, in the shortcut menu, select the system setup, and then select the system
management -> user management.
2, Left click to select the user name, click the "delete user" button. As shown below：
3, In the delete prompt box, click "OK". You can see the user is deleted in the user list.
Explanation
 Super users can not be deleted.
Edit user
Steps：
1, Right click the main interface, in the shortcut menu, select the system setup, and then select the system
management -> user management.
2, Left click and select user name and click the "Edit User" button. Go to the Edit User interface. As shown below：