User Manual

User Manual of Network Speed Dome
45
Figure 5-19 Configuring Region Exiting Detection
3. Select the region from the drop-down list for detection settings.
4. Click Draw Area to start the region drawing.
5. Click on the live video to specify the four vertexes of the detection region, and right click to
complete drawing.
Repeat the step to configure other regions. Up to 4 regions can be set. You can click Clear to
clear all pre-defined regions.
6. Click Arming Schedule to enter the arming schedule setting interface. The time schedule
configuration is the same as the settings of the arming schedule for motion detection. Refer
to Section 5.2.1 Configuring Motion Detection.
7. Click Linkage Method to select the linkage method taken for region exiting detection. Refer
to Section 5.2.1 Configuring Motion Detection.
8. Click Save to save the settings.
5.3.5 Configuring Unattended Baggage Detection
Purpose:
Unattended baggage detection function detects the objects left over in the pre-defined region
such as the baggage, purse, dangerous materials, etc. A series of actions can be taken when the
alarm is triggered.
Steps:
1. Enter the Unattended Baggage Detection settings interface:
Configuration > Event > Smart Event > Unattended Baggage Detection