User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Accessing to the Network Speed Dome
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- 5.1 Storage Settings
- 5.2 Basic Event Configuration
- 5.3 Smart Event Configuration
- 5.3.1 Configuring Intrusion
- 5.3.2 Configuring Line Crossing Detection
- 5.3.3 Configuring Region Entrance Detection
- 5.3.4 Configuring Region Exiting Detection
- 5.3.5 Configuring Unattended Baggage Detection
- 5.3.6 Configuring Object Removal Detection
- 5.3.7 Configuring Face Detection
- 5.3.8 Configuring Audio Exception Detection
- 5.4 PTZ Configuration
- Chapter 6 Speed Dome Configuration
- Appendix
User Manual of Network Speed Dome
23
Figure 4-7 Calling a Preset
For convenient preset selection, refer to the following steps to navigate to the preset you want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
The following presets are predefined with special commands. You can only call them but not
configure them. For instance, preset 94 is the “Remote reboot”. If you call the preset 94, the
camera starts auto scan function.
Pattern function varies depending on different speed dome models.
Table 4-4 Special Presets
Preset
Function
Preset
Function
34
Back to origin
92
Set manual limits
39
Day mode
93
Save manual limits
40
Night mode
94
Remote reboot
46
Day/night auto mode
Figure 4-8 Special Preset
You may need to use the OSD (On Screen Display) menu when controlling the camera
remotely. To display the OSD menu on the live view screen, you can call the preset number
95.