User Manual

User Manual of Network Speed Dome
21
4.4.2 Auxiliary Functions
The Auxiliary functions panel is shown in Figure 4-5.
Figure 4-5 Auxiliary Functions
 Light
Click to enable/disable the light supplement of the camera. This function is reserved.
 Wiper
Click to move the wiper once.
 Auxiliary Focus
The auxiliary focus function is reserved.
 Lens Initialization
Click to initialize the lens. The function varies depending on differen camera models.
 Manual Tracking
Note:
This function may vary according to different camera models.
Before you start:
Enter the Smart Tracking settings interface and enable smart tracking first.
Configuration > PTZ > Smart Tracking
Steps:
1. Click on the toolbar of live view interface.
2. Click a moving object in the live video.
The camera will track the object automatically.
 3D Positioning
Steps:
1. Click on the toolbar of live view interface.
2. Operate the 3D positioning function:
 Click a position of the live video. The corresponding position will be moved to the center of
the live video.
 Hold down the left mouse button and drag the mouse to the lower right on the live video.
The corresponding position will be moved to the center of the live video and zoomed in.
 Hold down the left mouse button and drag the mouse to the upper left on the live video.