User Manual
Table Of Contents
- Chapter 1 Overview
 - Chapter 2 Network Connection
 - Chapter 3 Accessing to the Network Speed Dome
 - Chapter 4 Basic Operations
 - Chapter 5 System Configuration
- 5.1 Storage Settings
 - 5.2 Basic Event Configuration
 - 5.3 Smart Event Configuration
- 5.3.1 Configuring Intrusion
 - 5.3.2 Configuring Line Crossing Detection
 - 5.3.3 Configuring Region Entrance Detection
 - 5.3.4 Configuring Region Exiting Detection
 - 5.3.5 Configuring Unattended Baggage Detection
 - 5.3.6 Configuring Object Removal Detection
 - 5.3.7 Configuring Face Detection
 - 5.3.8 Configuring Audio Exception Detection
 
 - 5.4 PTZ Configuration
 
 - Chapter 6 Speed Dome Configuration
 - Appendix
 
User Manual of Network Speed Dome 
93 
(2)  Input the IP Adreess. 
(3)  Click OK to finish adding. 
  Modify an IP Address 
Steps: 
(1)  Select an IP address from filter list and click Modify. 
(2)  Modify the IP address in the text filed. 
(3)  Click OK to finish modifying. 
  Delete an IP Address 
Left-click an IP address from filter list and click Delete. 
5.  Click Save to save the settings. 
Configure Security Service Settings 
Steps: 
1.  Enter the Security Service interface: 
Configuration> System > Security > Security Service 
2.  Check the checkbox to enable the Illegal Login Lock function. 
Illegal Login Lock: Enabling illegal login lock function is to automatically lock the device IP 
after  the  admin  user  performing  7  failed  password  attempts  (5  attempts  for  the 
user/operator). 
3.  Click Save to save the settings.   
6.4.4  User Management 
Enter the User Management interface: 
Configuration > System > User Management 
The admin user has access to create, modify or delete other accounts. Up to 32 user accounts can 
be created. 










