Installation Manual

1. Enter the Authentication interface:
Configuration> System> Security > Authentication
2. Set the RTSP Authentication/WEB Authentication type from the dropdown list. Digest and
digest/basic are selectable.
3. Click to save the settings.
Configuring IP Address Filter
Purpose:
With this function on, the camera allows certain IP addresses whether to log in or not.
Steps:
1. Enter IP Address Filter interface:
Configuration > System > Security > IP Address Filter
Figure 6-56 IP Address Filter
2. Check the checkbox of Enable IP Address Filter.
3. Select the type of IP Address Filter in the dropdown list, Forbidden and Allowed are
selectable.
4. Set the IP Address Filter list.
 Add an IP Address
Steps:
(1) Click Add to add an IP.
(2) Input the IP Adreess.
(3) Click OK to finish adding.
 Modify an IP Address
Steps:
(1) Click an IP address from filter list and click Modify.
(2) Modify the IP address in the text filed.
(3) Click OK to finish modifying.