User Guide

Network Video Recorder User Manual
66
Figure 6-25 Add NetHDD
7. Select NAS disk from the list, or manually enter the directory in NetHDD Directory.
8. Click OK.
Result
The added NetHDD will be displayed in the storage device list.
6.5.4 Configure Storage Mode
Configure HDD Groups
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a
particular HDD group through HDD settings.
Steps
1. Go to Configuration → Record → Storage Mode.
2. Select Mode as Group.
3. Select a group number.
4. Select IP cameras to record on the HDD group.
Figure 6-26 Group
5. Click Apply.
6. Restart the video recorder to activate the new storage mode settings.