User Guide

Network Video Recorder User Manual
24
4. Drag the text frames on the preview window to adjust the OSD position.
5. Click Apply.
5.3.3 Smart Event
Motion Detection
Motion detection enables the video recorder to detect the moving objects in the monitored area
and trigger alarms.
Steps
1. Go to Configuration → Camera → Event → Motion Detection.
Figure 5-10 Motion Detection
2. Select a camera.
3. Turn on Enable.
4. Set the motion detection area.
– Click Draw Area or Clear to draw or clear areas. The first area is set as full screen by default.
– Click Full Screen to set the motion detection area as full screen. You can drag on the preview
window to draw motion detection areas.
5. Adjust Sensitivity. Sensitivity allows you to calibrate how easily movement could trigger the
alarm. A higher value results in the more readily to triggers motion detection.
6. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered
by human body or vehicle. Only certain camera models support this function.
7. Set the arming schedule. Refer to Configure Arming Schedule for details.
8. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
9. Click Apply.