Specification Sheet

GA12
Catalog:
BALLAST MOUNTING SOURCES - CORDS
Fluorescent
Please specify 26, 32 or 42 WPL. Ballast included
RBHC
Fluorescent Ballast Canopy with
8' Black Cord (For indoor use)
RWHC
Fluorescent Ballast Canopy with
8' White Cord (For indoor use)
Metal Halide
Please specify 50, 70, 100, 150, or 175 Watt MH. Ballast included
HIDRC-BLC
Metal Halide Ballast Canopy with
8 Black Cord (For indoor use)
HIDRC-WHC
Metal Halide Ballast Canopy with
8 White Cord (For indoor use)
BALLAST MOUNTING SOURCES - ARMS
Fluorescent
Please specify 26, 32
or 42WPL.
Ballast included
Metal Halide
Please specify 50, 70, 100, 150,
or 175 Watt MH.
Ballast included
RTC
Fluorescent Ballast
Canopy
(Indoor/Outdoor Use)
HIDRC
Metal Halide Ballast
Canopy (for
indoor/outdoor use)
RWT
Remote Weathertight
Box for Metal Halide
(Indoor/Outdoor Use)
Metal Halide
Please specify 50, 70, 100, 150, or 175 Watt MH. Ballast included
RWTCB
Remote Weathertight
Box for Metal Halide
with Cast Back Plate
(Indoor/Outdoor Use)
RWTCBC
Remote Weathertight Box
for Metal Halide with Cast
Back Plate and Cover
(Indoor/Outdoor Use)
MHRI
Metal Halide Remote
Indoor Ballast
(Indoor Use Only)
BALLAST MOUNTING SOURCES - STEMS
Fluorescent
Please specify 26, 32 or 42WPL. Ballast included
RLC
Ballast Canopy w/ Swivel
(for indoor/outdoor use)
RTC
(For indoor/outdoor use)
Metal Halide
Please specify 50, 70, 100, 150, or 175 Watt MH. Ballast included
RWTCB
Remote Weathertight
Box for Metal Halide
with Cast Back Plate
(Indoor/Outdoor Use)
RWTCBC
Remote Weathertight Box
for Metal Halide with Cast
Back Plate and Cover
(Indoor/Outdoor Use)
MHRI
Metal Halide Remote
Indoor Ballast
(Indoor Use Only)
ANSI CODES FOR METAL HALIDE BALLASTS
MH50: ANSI Code M110/M148
MH70: ANSI Code M98/M143
MH100: ANSI Code M90/M140
MH150: ANSI Code M102/M142
MH175: ANSI Code M57/H39
Ballast Information:
Ballast housing is based on mounting options.
If required voltage cannot be determined, only 120 volts lead will be
pulled out of the fixture. All other line voltage wires will be left inside the
fixture in order to prevent damage to the ballast due to incorrect power
connections
Fluorescent Notes:
Multi-tap 120 volts and 277 volts provided
Minimum Starting Temperature: -18° Celsius
UL Listed and CSA Certified
Fluorescent dimming ballast available. Consult Factory
Metal Halide Ballast Notes:
Input Voltage 120/277
Minimum Starting Temperature: -20° Celsius
Maximum Ballast to Lamp Distance
50 watt: 5 ft. 70 watt: 15 ft. 100watt: 20 ft.150 watt: 10 ft.
Ballast to lamp distance is only limited by the size of the conductor
between the ballast and the lamp
To increase ballast to lamp distance long range ignitor available
Ballast and housing is not included in the shade pricing.
See mounting sources for ballast options, housing and available
wattages
ANP LIGHTING • Surf: www.ANPLighting.com • Call: 800.548.3227 • Fax: [phone]