Specification Sheet

GA12
Catalog:
Description:
12\" Galaxy Shade
Caution! Glass enclosure reduces maximum wattage.
Max Wattages are based on open lamp
Specification:
RLM shades manufactured from 1100 Aluminum Alloy
typically .08 -.125 thickness.
•White paint standard inside all painted fixtures.
Fixtures, arms and post mounts are U.L. wet listed
when installed according to manufacturers
instructions. Design and construction may change at
factorys discretion. Screw hardware may not match
finish, but are made of stainless steel.
•All fixtures come standard with 96" of lead wire.
Additional lead wire (LDW).
•For Color Selections see color page. ANP will do its
best to match your custom color. Consult factory for
prices.
•When ordering Raw Copper finish, please note that
some accessories/components such as finials,
decorative balls, and spacer tubes are painted copper
and are not raw copper. Cast back plates included are
solid copper. All hubs are painted copper.
•Some accessories may extend below fixture line or
be out of proportion. When using a combination of
accessories, contact factory for compatibility.
•Grills and Vapor Tight guards are available in painted
finishes only (standard & premium).
•Steel Shades available, consult factory.
Paint:
Standard Powder Coating Process
A polyester powder coat is used for superior gloss and color
retention. -State of the art 20 PSI pressure power wash at
140° incorporates five step iron phosphate process with sealer
and DI water to cleanse and pre-treat the metal surface for
maximum paint adhesion. Electrostatically applied ranging
from texture to smooth glossy polyester powder topcoat and
baked at 430° for maximum hardness and exterior durability.
Marine Grade Paint:
For objects exposed to extreme conditions as is found in
coastal regions or industrial atmospheres we offer, at an
additional charge, a highly weather and UV resistant powder
coating that withstands up to 3000 hours of continuous salt
spray and comes with a 5 year warranty. Consult Factory for
additional paint cost and availability.
Inc
(Incandescent)
WPL
(Fluorescent)
HID
High Pressure
Sodium/Metal
Halide
Max Wattages 100W 32W 50W
**HID refers to both Metal Halide(MH) and High Pressure Sodium(HPS).
Please specify preferences.
Caution! Glass enclosure reduces maximum wattage.
Max Wattages are based on open lamp
Available Colors
Color plates below represent available colors for this product.
If photograph not available in selected color, color back plate will be shown
40 41 42 43 44 45 46
47 48 49 50 51 52 53 55
56 57 58 59 60 61 62 64
65 66 67 68 69 70 71 72
76 99
ANP LIGHTING • Surf: www.ANPLighting.com • Call: 800.548.3227 • Fax: [phone]