Quick Start Guide

SETTING UP

fill a pot

• Fill a pot or container with water.

• Place it on a heat-safe surface or trivet, away from counter edges.

attach your cooker

• Loosen the rear screw on your Anova Precision® Cooker clamp.

• Fit the clamp over the edge of your pot.

• Tighten the rear screw so it is snug against the wall of the pot.

• Adjust the height of the cooker by adjusting the side screw.

(do not overtighten screws)

plug in

• Plug in your Anova Precision® Cooker.

• Place your food in a sealable bag and lower the bag into the water.

• Clip the bag to the side of the pot.