OVEN USER GUIDE Anova_Oven_Guide_FINAL.
S A F E T Y S TA N D A R D S When using electrical appliances, basic safety precautions should always be followed, including the following: 10. Do not use appliance for other than intended use. 11. Do not clean with metal scouring pads. Pieces can 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against electric shock, do not place 12. The use of accessory attachments not cord, plugs, or appliance in water or other liquid. 4.
S A F E T Y S TA N D A R D S 19. While in operation, a fire may occur if the oven is 25.To turn the Oven off, press and briefly hold the 20.Extreme caution should be exercised when using INITIAL SETUP 21. Do not place any of the following materials in the ⊲ Remove all the packaging and labels. ⊲ Do not install or use a damaged appliance. ⊲ Always take care when moving the appliance, covered or touching flammable material, including curtains, draperies, walls, and the like.
S A F E T Y S TA N D A R D S USAGE ⊲ This is a cooking appliance. Parts and ⊲ ⊲ ⊲ ⊲ ⊲ ⊲ ⊲ ⊲ accessories will be hot when in use. Use oven mitts and trivets to protect hands and surfaces from burns. Handle hot items carefully. This appliance is for household use only. Do not change the specification of this appliance. Do not leave children alone or unattended in the area where the Oven is in use. Make sure that the ventilation openings are not blocked.
S A F E T Y S TA N D A R D S ⊲ Use a deep pan for moist cakes. Fruit juices cause stains that can be permanent. ⊲ This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. ⊲ Always cook with the oven door closed. ⊲ Do not position oven behind a furniture panel (e.g. a door) as heat and moisture can build up during operation that could cause subsequent damage to the appliance, the housing unit or the floor.
WELCOME Thank you for choosing the Anova Precision® Oven! We’re excited to bring this amazing technology into your home. With the countertop, steam-enabled Anova Precision® Oven, you’ll get the same high-quality and precise temperature control customers have come to expect from Anova, and so much more. The Anova Precision® Oven will change the way you make everything. We can’t wait to see what magic you cook up in the kitchen! Cheers, The Anova Team 6 Anova_Oven_Guide_FINAL.
STOP! READ BEFORE PROCEEDING Prepare the Oven before use. Refer to diagrams and information on pages 4–10 of this guide for operation details. HEATING ELEMENT PREPARATION ATTACH PARTS 1. Make sure the Oven is situated in a well-ventilated area and plugged in. 2. Remove all original packaging, as well as accessories, from the appliance. 3. Set the oven to 350°F (176°C) using the REAR HEATING ELEMENT for 15 minutes and press START. 4. Allow the oven to cool. Open the door to allow air to ventilate out.
YO U R OV E N 1 Handle / Display Controls 2 Drip Tray 3 Water Tank 4 Water Tank Lid 5 Steam Exhaust Outlet 6 Ventilation 7 Food Probe 6 4 1 3 2 7 5 8 Anova_Oven_Guide_FINAL.
I N S I D E YO U R OV E N 1 Food Probe Port 2 Upper Heating Element 3 Rear Heating Element / Convection Fan 4 Lower Heating Element 5 Wet Bulb Sensor 6 Upper Temperature Sensor 7 Lower Temperature Sensor 8 Descale Drain Outlet 9 Tray Positions (5) 10 Light 2 10 1 6 3 9 7 8 9 5 4 9 Anova_Oven_Guide_FINAL.
D I S P L AY C O N T R O L S Temperature Settings 2 Cook Target 4 1 7 Timer Sous Vide Probe 3 6 5 The handle of the door on the Anova Precision® Oven is also the touchscreen display. Oven settings can be controlled manually from the display or the Anova Precision® Oven App. 8 1 Wi-Fi Connection Indicator 3 Temperature Mode 2 Heating Element Selector 4 Temperature Display • Bottom • Both 5 Temperature Controls • Top • Rear 10 Anova_Oven_Guide_FINAL.
Target Settings Steam Settings 9 12 er FILL 14 be 13 10 DESCALE 6 Cook Target Selector 9 Steam Display 11 Fill Water Tank Indicator 7 Cook Target Display 10 Steam Controls 12 Descale Indicator 8 Cook Target Controls 13 Start/Stop 11 Anova_Oven_Guide_FINAL.
H E AT I N G E L E M E N T S The Anova Precision® Oven has three heating elements and a fan. Choosing your Sous Vide heating elements is separate from setting temperature targets. REAR ELEMENT 1600 W, max 480°F (250°C) The Rear Heating Element is located behind the back wall of the oven cavity. It wraps around the Convection Fan, which helps to circulate heat throughout the oven.
I N C LU D E D AC C E S S O R I E S 1 Perforated Pan 2 Wire Rack 3 Solid Pan NOTE: The stainless steel pans included with the Anova Precision® Oven are designed to work with the Anova Precision® Oven. Do not use the pans with other ovens or appliances, as it may result in damage to the pans, which will cause them to no longer fit into the Anova Precision® Oven as designed. 1 2 3 13 Anova_Oven_Guide_FINAL.
SETTINGS These pages refer to the Display diagram found on Page 6. TEMPERATURE AND COOK TARGET Sous Vide ⊲ Press TEMPERATURE MODE to turn Sous Vide Mode on or off. ⊲ Press or hold the + AND - TEMPERATURE CONTROLS to adjust temperature. Timer ⊲ Press COOK TARGET to switch between Probe TIMER or PROBE. The display will change depending on the target you have selected. ⊲ Press or hold the + AND - COOK TARGET CONTROLS to adjust the TIMER or PROBE target temperature.
SETTINGS When Sous Vide Mode is on, the Oven continuously measures the temperature your food experiences using the state-ofthe-art WET BULB SENSOR. This sensor measures the temperature of water evaporation throughout your cook, and the Oven regulates that temperature so that your food never cooks past your setting. Just as in sous vide, foods will not brown or crisp using Sous Vide Mode.
SETTINGS This page refers to the Display diagram on Page 6. USING STEAM ⊲ Press the + OR - STEAM CONTROLS toFILL adjust Steam percentage. ⊲ To stop using steam, press the - STEAM DESCALE CONTROL until the percentage reaches 0 FILL and the display says “OFF”. ⊲ If the Water Tank is empty during or before cooking with Steam, the FILL DESCALE INDICATOR will blink. Fill the Water Tank, then press the Fill Indicator to continue the flow of Steam.
CONNECT TO WI-FI Connecting your Oven to the Anova Precision® Oven App with Wi-Fi gives you the ultimate cooking experience. 1 DOWNLOAD the Anova Precision® Oven App on your smartphone or tablet. 2 CONNECT to your preferred Wi-Fi network. 3 OPEN the app and follow the on-screen instructions to connect. BENEFITS OF USING THE APP ⊲ Set your Oven remotely, and monitor the cooking process from anywhere. ⊲ Browse and cook from a collection of easy-to-follow recipes made exclusively for Anova.
CARE AND CLEANING GENERAL CLEANING ACCESSORIES ⊲ Clean the front of the appliance with a soft cloth with warm water and a cleaning agent. ⊲ To clean metal surfaces, use a stainlesssteel cleaner. ⊲ In case of mineral buildup on the bottom of the interior, use some drops of distilled vinegar with warm water and a soft sponge. ⊲ Clean the appliance interior after each use. Fat accumulation or other food remains may result in a fire. ⊲ Clean stubborn dirt with an oven cleaner.
CLEANING THE WATER TANK 1. Remove the water tank by sliding outwards as shown in fig. 1. 2. Remove the lid of the water tank. 3. Gently wash the tank and lid with a soft cloth or non-abrasive sponge with warm water and dish soap. 4. Carefully dry the Water Tank with a microfiber cloth, then slide it back into position on the side of the oven. 5. Fill the Water Tank with fresh distilled water and replace the lid on the tank. NOTE: Tank and lid are not dishwasher safe.
D E S C A L E CYC L E When the steam generator operates, there is an accumulation of limestone inside because of calcium content in the water. Periodic descaling of residual buildup can increase the life span of your Oven and prevent any decline in performance. Descaling is recommended after 30 hours of steam usage. The automated Descale cycle takes about 45 minutes to complete. You will need a desclaing solution and water to perform this cycle.
D E S C A L E CYC L E 1. Remove all accessories. Put the solid pan on the bottom of the cavity so that the Descale drain outlet is protruding out over the edge of the tray to catch liquids. See fig. 2. 2. Remove and empty the water tank, then re-attach to the oven. 3. Mix 3/4 Cup (about 200 mL) descaling solution with 1 Quart (1 L) water, and pour into the Water Tank. 4. Activate the Descale cycle by pressing the DESCALE INDICATOR on the Display or in the App. The first phase is about 30 minutes. 5.
R E P L AC E L I G H T B U L B The Anova Precision® Oven uses a high temperature G9 Halogen Lamp, 120 V, 25 W inside the cavity. If the light requires replacement, follow these steps: 1. Unplug the oven from the power supply 2. Ensure the oven is cool before attempting. 3. Open the door and look to the upper surface of the cavity. 4. Carefully remove all four screws that hold the light cover in place. See fig. 3. 5.
FCC/IC COMPLIANCE • Reorient or relocate the receiving antenna. This device complies with Part 15 of the FCC Rules / Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. • Increase the separation between the equipment and receiver.
ANOVACULINARY.COM SUPPORT@ANOVACULINARY.COM Anova_Oven_Guide_FINAL.
