User Manual

Eminere Side
16
4. Software update
Software update of Eminere has to be done by means of the software ROBE Uploader running on PC.
The ROBE Uploader is a software for automatized software update of ROBE fixtures. The ROBE Uploader switches
Emineres to the update mode automatically.
Please see https://www.robe.cz/robe-uploader/ for more information.
DMX or Ethernet connection via E-box
I
f the option Standard is selected from the menu E-box mode and LED modules are connected in series,
the E-box will be updated including connected Eminere modules. You have to use the file EminereEbox.lib in the
ROBE Uploader for this operating mode.
If the option Pass-Thr is selected from the menu E-box mode and LED modules are connected in series, you have to
do the following steps to update Emineres including the E-box:
1. Set the E-box to the Standard mode and switch it off/on. Only E-box will be shown in the ROBE Uploader.
You have to use the file EminereEbox.lib in the ROBE Uploader for software update of the E-box and
connected LED modules.
2.
After updating, set the E-box to the Pass-Thorough mode and switch it off/on
.
For more information about updating please see the E-box Lite/Daisy/Star user manual.