QR code for user manual Version 2.
Eminere Side Table of contents 1. Safety instructions ......................................................................................................................................................3 2. Fixture exterior view ................................................................................................................................................... 4 3. Installation ..................................................................................................................
Eminere Side FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING YOUR Eminere Side ! Save it for future reference. This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings written in this manual.
Eminere Side Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened. The fixture becomes hot during operation. Allow the fixture to cool approximately 30 minutes prior to servicing or maintenance. Operate the fixture only after having familiarized yourself with its functions. Do not permit operation by persons not qualified to operate the fixture.
Eminere Side 3. Installation 3.1 Mounting the fixture The Eminere Side can be arranged in any orientation on a flat, non-flammable surface by means of two mounting brackets (5), the LED module (2) can be tilted 120° to adjust desired beam position. Ensure that the structure to which you are attaching the unit is secure. 3.2 Connection to mains The unit must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
Eminere Side They cannot stay disconnected outdoor. The output panel connector at last fixture in the Eminere Side chain has to always be covered with the watertight cap to keep declared IP rating. The Eminere modules should be connected to the E-box which allows power supply of the Eminere modules and their control.
Eminere Side E-box Pro E-box Lite 7
Eminere Side Number of connected Emineres Side to one E-box output depends on a cable length, power voltage, type of and E-box. The tables below state max. theoretical number of Emineres connected to the one LED output of the E-box without Booster boxes.
Eminere Side EMINERE SIDE 4 Voltage Cable length * 120V 190V 230V 277V 10 m 21 33 40 48 20 m 21 33 40 48 30 m 15 33 40 48 50 m 9 22 32 47 70 m 6 16 23 38 100 m 4 11 16 23 200 m 2 5 8 12 * Cable length is a total cable length between E-box and last connected Eminere Side. Example: Total cable length=L1+L2+L3 Notice for the E-box Star: The tables above state max. total number of Emineres Side connected to 6 LED outputs of the E-box Star (or max.
Eminere Side 70 m 25,50,75,100,125,150,175 63,126,189 92,184 133 100 m 17,34,51,68,85,102,119, 136,153,170,187 44,88,132,176 64,128 93,186 200 m 9,18,27,36,45,54,60,72,81 90,99,108,117,126,135,144 153,162,171,180,189, 22,44,66,88,110, 32,64,96,128, 132,154,176 160 EMINERE SIDE 2 47,94,141, 188 Max.
Eminere Side EMINERE SIDE 4 Max. number of Emineres 4= 48 Voltage Cable length 120V 190V 230V 277V 10 m 21,42 33 40 - 20 m 21,42 33 40 - 30 m 15,30,45 33 40 - 50 m 9,18,27,36,45 22,44 32 47 70 m 6,12,18,24,30,36,42 16,32 23,46 38 100 m 4,8,12,16,20,24,28,32,36, 40,44 11,22,33,44 16,32 23,46 200 m 2,4,6,8,10,12,14,16,18,20, 22.24.
Eminere Side 3.4 The Booster box installation ALWAYS DISCONNECT THE EMINERES SIDE FROM MAINS BEFORE CONNECTING/DISCONNECTING THE BOOSTER BOX. The Booster box falls under protection class I. Therefore, every Booster box has to be connected to a mains socket outlet with a protective earthing connection. 1.Unscrew the four screws (1) from the cover (2) on the Booster box to get access to the terminal block (3) and two mounting holes of diameter of 4.6 mm (4). 2.
Eminere Side 3.5 Jumper cable assembling 1. Dismantle the connector and slide its parts onto the cable (6). Use the seal with inner diameter of 14.5 mm for the Anolis cable (P/N 13053138 or P/N 13053139). The seal with inner diameter of 14.5 mm serves for cable of diameter 10-14.5mm. The seal with inner diameter of 10 mm serves for cable of diameter 8-10mm. Parts of the connector Detail of Sealing circle (2) placing 2. Put the seiling circle (2) on the connector with screws (1). 3.
Eminere Side US version 4. Put parts of the connector on the cable (6) and connect wires to the connector. First connect power wires (L,N, Earth) and after that data wires (D+, D-, 0V).
Eminere Side 5. After connecting wires to the connector, tighten the three data wires (D+,D-, 0V) by means of the cable binder (7). 6. Screw the clamp ring (3) to the connector (1), insert the seal (4) to the clamp ring (3) and tighten the sealing nut (5) enough. During the steps DO NOT TWIST the cable (6). 7. Use the same procedure to assemble the connector on the second end of the cable. IMPORTANT Do not bend the cable near to the connector, minimum distance for bending is 50mm.
Eminere Side 4. Software update Software update of Eminere has to be done by means of the software ROBE Uploader running on PC. The ROBE Uploader is a software for automatized software update of ROBE fixtures. The ROBE Uploader switches Emineres to the update mode automatically. Please see https://www.robe.cz/robe-uploader/ for more information.
Eminere Side 5.
Eminere Side IP67 • E-box Lite 1 output 1 Main power Input Control: DMX, W-DMX control, RDM Pixel control (1px= 1ft) 120-277 V Input Connection via screw terminal blocks, inlets via grommet IP67 Protection factor • CE: IP 67 • US: Suitable for wet location Impact rating • CE: IK06 Operating ambient temperature range • -20°C /+40°C (-4°F /+104°F) Operating temperature • +67°C @ Ambient +40°C (+153°F @ Ambient +104°F) Connection • Input: panel connector Amphenol ABAB-DMQ06000021-IN (P/N13052952) • Output: pa
Eminere Side •Eminere Side 3: 7.0 kg (15.43 lbs) •Eminere Side 4: 8.92 kg (19.
Eminere Side • Eminere Side 3 • Eminere Side 4 20
Eminere Side • Booster box Included items • 1 x Eminere Side • 1 x User manual Optional accessories CE Leader Cables FF: Leader Cable FF 2m (P/N 13053005) Leader Cable FF 5m (P/N 13053006) Leader Cable FF 10m (P/N 13053007) Leader Cable FF 25m (P/N 13053008) Leader Cable FF 50m (P/N 13053009) US Leader Cables FF: Leader Cable FF 2m (P/N 13053010) Leader Cable FF 5m (P/N 13053011) Leader Cable FF 10m (P/N 13053012) Leader Cable FF 25m (P/N 13053013) Leader Cable FF 50m (P/N 13053014) 21
Eminere Side Jumper Cables FF/FM: Jumper Cable FF/FM 0,25m (P/N 13053052) Jumper Cable FF/FM 0,5m (P/N 13053053) Jumper Cable FF/FM 1m (P/N 13053054) Jumper Cable FF/FM 2m (P/N 13053055) Jumper Cable FF/FM 3m (P/N 13053056) Jumper Cable FF/FM 5m (P/N 13053057) Jumper Cable FF/FM 10m (P/N 13053058) Waterproof Cover Cap FM ZAHB-0006 (P/N 17031173) Field Installable Connector FF (P/N 13053003) Field Installable Connector FM (P/N 13053004) E-boxes: E-box Daisy (P/N 10063655) E-box Daisy/W (P/N 10063638) E-box L
Eminere Side 7. ChangeLog This section summarizes changes in the user manual. Version of the manual Date of issue Description of changes 1.1 10/07/2020 Voltage range changed 1.2 23/07/2021 Optional accessories changed 1.3 19/08/2021 Jumber cables changed in Optional accessories 1.4 19/10/2021 Technical specifications changed 1.5 26/11/2021 Optional accessories changed 1.6 20/12/2021 Jumper cable mounting added 1.7 06/01/2022 Jumper cable mounting changed 1.
DMX protocol Eminere 1/2/3/4 and Eminere Side 1/2/3/4 - DMX protocol Eminere Inground 2/4 - DMX protocol Eminere Remote 1/2/3/4 - DMX protocol Version: 3.1 (23 modes in total), software version 3.
DMX protocol Eminere 1/2/3/4 and Eminere Side 1/2/3/4 - DMX protocol Eminere Inground 2/4 - DMX protocol Eminere Remote 1/2/3/4 - DMX protocol Version: 3.
DMX protocol Eminere 1/2/3/4 and Eminere Side 1/2/3/4 - DMX protocol Eminere Inground 2/4 - DMX protocol Eminere Remote 1/2/3/4 - DMX protocol Version: 3.
DMX protocol Mode/channels 17 18 19 20 DMX Value 0 - 255 - - 4 5 0 - 255 Cool White LEDs saturation control (0-100%) 0 - 255 Warm White LEDs saturation control (0-100%) 6 - - - 7 - - - 8 - Warm White LEDs saturation control (0-100%) 0 - 255 Cool White LEDs saturation control (0-100%) 0 - 255 Light intensity coarse (0 - 100%) 0 - 255 Light intensity fine - - 6 - - - proportional proportional Dimmer 2 0 - 255 Light intensity coarse (0 - 100%) 0 - 255 Light intensity fine
