User Manual

Eminere Inground
10
Note: If the Emineres Inground are installed in a loose soil (e.g. sand, gravel) the cover plate support (25)
has to be fastened under the cover plate at outer (end) Eminere Inground. Screw the cover plate support
(25) on the outside of the Eminere Inground by means of two screws Allen bolts M5x10 with washers and
nuts M5.
Cover plates overview:
Single fixture
End fixture in a row of fixtures
Middle fixture in a row of fixtures
(15)-Cover plate end (optional )
(22)-Cover plate continuous (optional)
(23)-Cover plate middle (one piece is a standard part of fixture)