User Manual

Eminere
6
The output panel connector at last fixture in the Eminere chain has to always be covered with the water-tight
cap to keep declared IP rating.
The Eminere modules should be connected to the E-box which allows power supply of the Eminere modules and
their control.
Do not connect (disconnect) Emineres to the E-box or Booster box and each other when they are under voltage!
When you change any setting of the E-box, disconnect the E-box from power and connect it to power again
to activate changes which you have made.
Examples of connection for various versions of the E-box.
Please read the E-box user manual for more information about its setting and connection to Eminere modules.
Needed cables are stated in the chapter “Technical information“.
E-box Daisy
E-box Star