User Manual

Calumma XS
14
5. Software update
Software update of Calumma XS modules has to be done by means of the software ROBE Uploader running on PC.
The ROBE Uploader is a software for automatized software update of ROBE fixtures. The ROBE Uploader switches
Calummas XS to the update mode automatically.
Please see https://www.robe.cz/robe-uploader/ for more information.
The Calummas XS have to be operated in the Pass-Through mode only.
To update Calummas XS including the E-box Remote.
1. Update connected LED modules by means of the file Calumma.lib in the ROBE Uploader.
2. Set the E-box Remote to the Standard mode and switch it off/on. Use the file EminereEbox.lib in
the ROBE Uploader for software update of the E-box Remote.
3. After updating the E-box Remote, set the E-box Remote to the Pass-Through mode and switch it off/on.
For more information about updating please see the E-box Remote user manual and E-box Remote Base user
manual.
Examples of connection for software update
1. By means of DMX connection and Robe Universal Interface.