QR code for user manual Version 1.
Calumma XS Table of contents 1. Safety instructions ......................................................................................................................................................3 2. Fixture exterior view ................................................................................................................................................... 4 3. Control and connection ..........................................................................................................
Calumma XS FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING YOUR Calumma ! Save it for future reference. This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings written in this manual.
Calumma XS Immunity of the equipment is designed for electromagnetic environments E1, E2, E3 according to the standard EN55103-2 ed.2 Electromagnetic compatibility. Product family standard for audio, video, audiovisual and entertainment lighting control apparatus for professional use. Part 2: Immunity. The product (covers and cables) must not be exposed to a high frequency electromagnetic field higher than 3V/m.
Calumma XS 3. Control and connection The Calumma modules should be connected to the E-Box Remote or E-Box Remote basic via junction boxes. The E-box Remote has to be switched to the Pass-Through mode.
Calumma XS Note. Combination of Calummas XS and Emineres Remote is also possible. Example: From point of view of driver load (E-box Remote/E-box Remote Basic), max. number of Calummas connected to one E-box Remote/E-box Remote Basic is 40 but Calummas XS have to be operated in the Pass-through mode, it means that max. 32 Calummas XS can be connected in one string. Max. number of Calummas XS connected to the E-box Remote/E-box Remote Basic also depends on cable length. E-box Remote Cable length * Max.
Calumma XS * Cable length is a total cable length between one output of the E-box Remote (E-box Remote Basic) and last connected Calumma XS.
Calumma XS 4. Installation 4.1 Mounting the fixture The Calumma can be fastened in any orientation on a flat, non-flammable surface by means of mounting yoke (2). The LED module (4) can be tilted +180°/-180°. Use an Allen key 2.5 for adjusting a LED module position. Ensure that the structure to which you are attaching the fixture is secure.
Calumma XS 4.2 Connection to power The unit must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations. Junction box installation Junction box with one output Junction box with four outputs 1.Unscrew the four screws (1) from the cover (2) on the junction box to get access to the DPS with terminal blocks (3) and two mounting holes (4). 2. Screw the junction box on a non-flammable flat surface.
Calumma XS 3. Connect cables to terminal blocks. Two cable glands M20 x 1.5 serves for a power/data cable. One (or four) cable gland M12 x 1.5 serves for Calumma XS connection cable. Remove the end cap from the cable gland before passing the cable. We recommend to apply an adequate layer of the paste LOCTITE 5331 on the plastic holder of the cable gland before inserting it into the body of the gland. Cable gland M20x1.5 and M12x1.
Calumma XS Wiring of connection blocks on DPS RB4233 in the junction box with four LED outputs. Fuse F1-F4: 2A/500V AC.
Calumma XS Examples Termination via 120 Ohm resistor 12
Calumma XS Termination via RDM: 4. Screw the cover (2) back on the junction box.
Calumma XS 5. Software update Software update of Calumma XS modules has to be done by means of the software ROBE Uploader running on PC. The ROBE Uploader is a software for automatized software update of ROBE fixtures. The ROBE Uploader switches Calummas XS to the update mode automatically. Please see https://www.robe.cz/robe-uploader/ for more information. The Calummas XS have to be operated in the Pass-Through mode only. To update Calummas XS including the E-box Remote. 1.
Calumma XS 2.
Calumma XS 6.
Calumma XS Connection • Via E-box Remote/E-box Remote Basic Calumma IN: cable UL 20969 5x 20AWG (P/N 13053481), length 1m standard Interconnecting cable between junction boxes: SJTW 5x 14AWG (P/N 13053336) Junction Box for Calumma XS, (1x Output) Junction Box for Calumma XS, (4x Output) Weight • Calumma XS MC: 0.59 kg (1.3 lbs) • Calumma XS MC: 0.6 kg (1.
Calumma XS Junction box with one output Junction box with four outputs 18
Calumma XS Included items • 1 x Calumma XS MC / Calumma XS SC • 1 x User manual Optional accessories Top Hat Calumma XS RAL9011 (P/N 10980732) Half Top Hat Calumma XS RAL9011 (P/N 10980736) Tenon Adaptor for Calumma XS Pole Mount Bracket for Calumma XS Junction Box for Calumma XS, 1x Output, Ral 9011 (P/N 10980715) Junction Box for Calumma XS, 4x Output, Ral 9011 (P/N 10980716) 7.
DMX protocol DMX protocol for Calumma - All sizes - MC and SC Version: 1.
DMX protocol Mode/channels 1 2 3 4 5 6 7 Function DMX Value 7-8 9-10 11-12 13 14-23 24 25-34 35 36-45 46 47-56 57 58-67 68 69-78 79 White 4200 K White 5600 K White 6500 K Blue (Blue=full, Red+Green+White/Amber=0) 80-87 88-95 96-103 104-111 112-119 120-127 128-135 136-143 145-151 152-159 160-167 168-175 176-183 184-191 192-199 200-207 208-215 216-223 224-231 232-239 Red=0, Green->up,Blue =full, White/Amber=0 Cyan (Red=0, Green=full, Blue =full, White/Amber=0) Red=0, Green=full, Blue->down, White/A
DMX protocol Mode/channels 1 - 2 - 3 11 12 4 3 - 5 5 6 6 7 8 7 Function DMX Value 160-191 192-223 224-255 Shutter open Random strobe-effect from slow to fast Shutter open 0 - 255 Light intensity coarse (0-100%) Type of control step proportional step Dimmer 14 proportional Dimmer Fine 15 0 - 255 Light intensity fine Copyright © 2022-2023 Robe Lighting s.r.o.
DMX protocol DMX protocol for Calumma - All sizes - MC and SC Version: 1.
