Instruction Manual

INSTALLATION INSTRUCTIONS
CALUMMA M / L / XL SC AND MC
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: [phone] | E-mail: [e-mail] | www.anolislighting.com
VERSION 3.0 / 2_2023
9
A1
B C
Installation on FLAT POLE with two screws. Installation on POLE (diameter 76-116mm) with zip ties.
Maximum width zip ties is 20mm (not included packing).
A2
Drill three holes into the surface according the given dimensions. Insert the cable gland into the middle hole.
Fasten the Pole Adaptor on the surface by two screws, spring
washers and washers.
Fasten the Luminaire on the Pole Adaptor by three screws,
spring washers and washers.
A3 A4
Pole Adaptor must be installed with
two holes up