Instruction Manual

INSTALLATION INSTRUCTIONS
CALUMMA M / L / XL SC AND MC
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: info@anolis.eu | www.anolislighting.com
VERSION 3.0 / 2_2023
10
B1
Drill one hole into the surface according the given dimension.
B2
Drill three holes into the surface according the given dimensions. Insert the cable gland into the middle hole.
B3 B4
Fasten the Pole Adaptor on the surface by two screws, spring
washers, washers and spacers.
Pole Adaptor must be installed with
two holes up
Fasten the Luminaire on the Pole Adaptor by three screws,
spring washers and washers.
C1 C2
Insert the cable gland into the hole.