INSTALLATION INSTRUCTIONS CALUMMA M / L / XL SC AND MC QR code for Installations Instructions ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: info@anolis.eu | www.anolislighting.com VERSION 3.
INSTALLATION INSTRUCTIONS CALUMMA M / L / XL SC AND MC Fixture must be installed by a qualified electrican in accordance with all national and local electrical and construction codes and regulations.
INSTALLATION INSTRUCTIONS CALUMMA M / L / XL SC AND MC STEP 2 CABLE GLAND INSTALLATION Strip these lengths for cable connections. Slip the cable through the gland according to the picture below and do not assemble the gland yet. Use wrench size 22 for cable gland M20x1.
INSTALLATION INSTRUCTIONS CALUMMA M / L / XL SC AND MC C WIRELESS DMX - each fixture Calumma Connection – colour coding WIRE POWER CONNECTION WIRE DATA CONNECTION Data + (+) Black L Red Blue N White Data - (-) Shielding Data 0V (0) Green/Yellow next Junction Box Power Junction Box D WIRELESS DMX - first fixture Calumma Connection – colour coding WIRE POWER CONNECTION WIRE DATA CONNECTION Data + (+) Black L Red Blue N White Data - (-) Shielding Data 0V (0) Green/Yellow next J
INSTALLATION INSTRUCTIONS CALUMMA M / L / XL SC AND MC F DMX or ETHERNET via E-Box with Leader and Jumper Cable FA FB LOCK 1 2 Please align the arrow symbol and mate the connector. Do NOT rotate the connector. Correct connection should be signalized by silent „click“ sound. Mating complete. UNLOCK 1 2 Rotate NUT 30 degrees anti-clockwise, same as the arrow direciton. (Please do not rotate clockwise during unmating process) Drop out.
INSTALLATION INSTRUCTIONS CALUMMA M / L / XL SC AND MC B WIRELESS DMX - each fixture Connection – colour coding WIRE POWER CONNECTION Calumma WIRE DATA CONNECTION Data + (+) Black L Red White N Orange Data - (-) Blue Data 0V (0) Green/Yellow next Junction Box Power Junction Box C WIRELESS DMX - first fixture Calumma Connection – colour coding WIRE POWER CONNECTION WIRE DATA CONNECTION Black L Red Data + (+) White N Orange Data - (-) Blue Data 0V (0) Green/Yellow next Juncti
INSTALLATION INSTRUCTIONS CALUMMA M / L / XL SC AND MC STEP 5 INSTALLATION OF ACCESORIES HALF TOPHAT 1 TOPHAT OPTICAL DEMO SET 2 Screw-out 4 screws from the cover plate. 3 Remove the cover plate. 4 Place the accessories (TOPHAT, HALF TOPHAT, OPTICAL DEMO SET) onto luminaire and centre it. Fasten the accessories (TOPHAT, HALF TOPHAT, OPTICAL DEMO SET) to the luminaire by the 4 packed-in washers and screws. ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.
INSTALLATION INSTRUCTIONS CALUMMA M / L / XL SC AND MC FLOOR STAND 5 Only for Optical Demo Set Slide the Optical foil into the space of Optical Demo Set. 1 2 Place the luminaire on tenon on the Floor Stand. POLE ADAPTOR The Luminaire fasten by one washer one flexible washer and one nut closed. A Installations on POLE(diameter 76-116mm) with two screws. ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: info@anolis.eu | www.
INSTALLATION INSTRUCTIONS CALUMMA M / L / XL SC AND MC B C Installation on FLAT POLE with two screws. A1 Installation on POLE (diameter 76-116mm) with zip ties. Maximum width zip ties is 20mm (not included packing). A2 Drill three holes into the surface according the given dimensions. A3 Insert the cable gland into the middle hole. A4 Pole Adaptor must be installed with two holes up Fasten the Pole Adaptor on the surface by two screws, spring washers and washers.
INSTALLATION INSTRUCTIONS CALUMMA M / L / XL SC AND MC B1 B2 Drill three holes into the surface according the given dimensions. B3 Pole Adaptor must be installed with two holes up Fasten the Pole Adaptor on the surface by two screws, spring washers, washers and spacers. C1 Drill one hole into the surface according the given dimension. Insert the cable gland into the middle hole. B4 Fasten the Luminaire on the Pole Adaptor by three screws, spring washers and washers.
INSTALLATION INSTRUCTIONS CALUMMA M / L / XL SC AND MC C3 Pole Adaptor must be installed with two holes up Installations Pole Adaptor with two zip ties. C4 Fasten the Luminaire on the Pole Adaptor by three screws, spring washers and washers. FOR ALL INSTALLATION VERSIONS Pull the cable through the inside of the Pole Adaptor and the cable gland and return to STEP 3. ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: info@anolis.
