User Manual
3/9
End users must follow the specific operating instruction for satisfying RF exposure
compliance.
Do not remove the covers during working.
Do not try to repair or replace any components inside of the equipment. Alteration
or abuse of the equipment or other components will void this product’s warranty,
and could be dangerous to the user.
PACKAGE CONTENTS
(1) Packages include the following
:
① 1Pcs AN-L50VA-01 Booster with FME Male connectors.
② DC Car Charge.
③Screws Mounting Kits.
④User manual (this document).
(2)
Booster interface description:
LED light:The corresponding LED on the right is used to indicate the following different working
conditions of the booster.
LED Indicator
Booster working conditions
LED LIGHT
Continuous GREEN @normal;
Twinkly GREEN @input signals may be not enough;
Continuous YELLOW @ stronger input signals, AGC is working;
Twinkly YELLOW@ self–oscillation happen ,AGC is working.
Continuous RED@ power supply is shut down;
Twinkly RED@ self–oscillation happen but power supply is NOT shut down.
②Power supply jack: The booster uses a power input range of DC 5-12V.
③INDOOR and OUTDOOR port:The two ports are used to connect outdoor and indoor
antennas.
(3)Antennas and Cables:
In order to use the Booster, you still need the corresponding indoor antenna 1pcs,
outdoor antenna 1pcs, outdoor cable 1pcs and indoor cable 1pcs.