AN-L50VA-01 Cell Phone Signal Booster User Manual 1/9
Introduction With the popularity of mobile communications, people want to make a call anytime, anywhere, so the coverage requirement of communication network is higher and higher, but the reality is not so, sometimes mobile phone signal is not very good, you want to make a smooth call, even in some places cell phone cannot dial out. in this cases, cell phone signal booster can solve this problem in a certain extent.
End users must follow the specific operating instruction for satisfying RF exposure compliance. Do not remove the covers during working. Do not try to repair or replace any components inside of the equipment. Alteration or abuse of the equipment or other components will void this product’s warranty, and could be dangerous to the user. PACKAGE CONTENTS (1) Packages include the following： ① 1Pcs AN-L50VA-01 Booster with FME Male connectors. ② DC Car Charge. ③Screws Mounting Kits.
Antennas and cables kitting information are as follows Name Indoor Antenna Model Gain/Loss Patch Antenna PTE-PA-800-2500 3dbi @698-787MHz Indoor Panel PTE-PN-800-2500 7dbi @698-787MHz Magnet Antenna PTE-MA-800-2500 3dbi @698-787MHz Omni Tube Antenna PTE-GF-700-2500 3dbi @698-787MHz 20feet 3D-FB PTE-3D-FB-5NB 2.19db@698-787MHz PTE-3D-FB-10NB 5.
and connect the connectors by hand, please do not use any tools, otherwise it will be over installed to break the connectors. Note: Place the antenna at least 6 inches away from any windows including sunroofs, and 12 inches away from any antennas on the vehicle. （2）Installation of Indoor Antenna The inside patch antenna should be stuck on the back of the front seat and face the space you need to use your phone. Note: Please don’t mount it on any metal surface.
LED is not light 1.Find an alternate DC Car Charge and try again. 2.Check the power outlet, the power adapter plug maybe is poor connected. 3.If the problem is still not solved, please contact our company support at support@ANNTLENT.com Booster has no 1. Check whether the direction of the booster is worng connected. 2. Make a call to your mobile phone operator to determine if the frequency band is correct. 3. Check whether the indoor and outdoor antenna is installed correctly effect 4.
A subscriber must have the consent of a wireless provider to operate a Consumer Signal Booster. Subscribers may obtain provider consent in a variety of ways. For example, AT&T, Sprint, T–Mobile, and Verizon Wireless have voluntarily committed to allow their subscribers to use properly certificated Consumer Signal Boosters (i.e., boosters that meet the new rules) on their networks.
●Verizon’s online registration link: (http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html). ● AT&T will allow online registration and will inform OET Lab with the weblink when it is ready. ●U.S.Cellular : (http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp). WARRANTY Warranty information applicable to your Booster Warranty Period: 2 year. Type of Warranty Service: Customer Replaceable Unit and Customer Carry-In or Mail-In Service.
© 2020 Copyright ANNTLENT Technology (Shenzhen) Co., Ltd. The information contained in this document is subject to change without notice.
