BABY MONITOR SM24 USER MANUAL CATCH EVERY PRECIOUS MOMENT OF YOUR BABY
support@anmeate.com THANK YOU FOR PURCHASING ANMEATE BABY MONITOR. PLEASE ACTIVE AND EXTEND YOUR WARRANTY NOW. (Register within 7 days after receiving your product) To register your product Visit https://anmeate.com/warranty Finished the form on the website That is it! Your product is now active and extend warranty! If you are unsatisfied with your product, please contact us via support@anmeate.com or anmeate.com before leaving a negative review. We will definitely give you a satisfactory solution.
support@anmeate.com Congratulation! Now you can take care of your babies anywhere and any time! Please read the user manual before using! Please retain your original dated sales receipt for your to records. For warranty service of your baby monitor, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
support@anmeate.com 1. SAFETY INSTRUCTIONS : CAUTION: Keep small parts away from children. Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby's reach all the time. Baby monitors and cameras with power cords should never be hung on or near the crib. This product is not a toy and should be kept out of children's reach. This product contains small parts. Be care when unpacking and assembling the product.
support@anmeate.com Keep away from sources of heat: This unit should not be exposed to direct heat sources such as a candle, replace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct sunlight. Power source: This unit should only be used with the AC power adapters included in this package (rated 5V 600mA). Damage requiring service: This unit should be serviced by qualified personnel . WARNING: IR emitted from this product.
support@anmeate.com interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.
support@anmeate.com television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment into an outlet different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
support@anmeate.com 2. WARRANTY TERMS We take quality very seriously. This is why all of our products come with one year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact the store where you purchased the product , or contact the Amazon seller. 3.
support@anmeate.com 4. PRODUCT OVERVIEW 4.1 Parent unit overview: Power & Charging LED Volume LED Speaker Power key 2.4'' LCD screen DC-jack Menu/Exit Volume + / Up key OK Talk to baby Stand MIC Brightness + / Right key Volume - / Down key Reset key (under stand) Brightness - / Left key 4.
support@anmeate.com 4.
support@anmeate.com 5. PLACEMENT OF THE BABY MONITOR: Aim to provide the best viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-signt to a strong light source or direct sunlight. Avoid installing the camera where there are thick walls or obstructions between the camera and the monitor. STRANGULATION HAZARD — keep cord out of child’s reach. Never place camera or cords within 3 feet of crib or playpen.
support@anmeate.com 7. OSD MODE OPERATION 7.1 PARENT UNIT SCREEN ON/OFF Short press the power key to turn on / off the screen. 7.2 VOLUME ADJUSTMENT Press the UP key Press the DOWN key to increase the volume. to decrease the volume. 7.3 BRIGHTNESS ADJUSTMENT Press the Left key Press the Right key to decrease the brightness. to increase the brightness. 7.4 DIGITAL ZOOM & PAN / TILT Press and hold Menu/Eixt key around 2 seconds to operate Zoom in / out.
support@anmeate.com 7.5 CAMERA VIEW / SCAN (only have paired two or more cameras have this function) Press OK key to view / scan camera. During scan mode, the scan icon will be displayed on the top of screen. And each cameras' video will be stay on the LCD around 10 seconds then change to next camera. 7.6 TALK TO BABY To talk, press and hold the talk key on the front of the monitor. Release the button when you finish talking and you can listen to the sound from the baby's room .
support@anmeate.com 8. MENU OPERATION 8.1 ECO SETTING This mode allows you to control the sound activation of your baby monitor. The ECO default settng is OFF. If there is no sound around the camera within 30 Seconds, it will stops transmitting. The monitor screen turns off when the camera is not transmiting. When the camera detects the sound is louder than set sensitivity level, it will start transmiting the signal to the monitor again. To change the ECO level, please follow the next instructions: 1.
support@anmeate.com 8.3 LULLABY SETTING You can soothe the baby to sleep by playing a gentle lullaby from baby unit. 1. Press the Menu/Eixt key 2. Press the LEFT key and the menu will pop up. or RIGHT key 3. Press UP key or DOWN key 4. Press OK key to confirm. until the lullaby icon is highlighted. to select. 8.4 PAIRING THE CAMERA AND MONITOR 1. Press the Menu/Eixt key 2. Press the LEFT key then press UP key 3. Press OK key then the menu will pop up.
support@anmeate.com 9. TECHNICAL DATA 9.1 System General Frequency 2.4GHz FHSS Type of Moduiation GFSK Transmittng Power 18dBm Max Operation Environment Indoor use only; Temperature: 0-40 °C ; Humidity: 5% to 90% rh. ( relative humidity) Operating Range Up to 900 feet (straight line and open space) Power adapter Input: 100-240VAC 50 / 60Hz,200mA Max; Output: 5V, 600mA; LCD 2.4'' TFT LCD Rechargeable battery for monitor Model: 503450; 3.7V, 950 mAh, 3.
support@anmeate.com 10. TROUBLE SHOOTING The power adapters may not be properly connected. Confirm that the camera and monitor are ON. No reception on Camera may be far away from the monitor. the monitor Camera and monitor may not be properly paired; follow PAIRING instructions. Restart Baby unit and Parent unit. Press the reset key at the back of Parent unit. Move the monitor close to the camera. The camera or monitor may be placed too close to many metal objects.
support@anmeate.com 11. MAINTENANCE Clean the surfaces of the camera and monitor with a soft, fluff-free cloth. Never use cleaning agents or solvents. If the units become dirty, use a lightly dampened cloth to wipe surfaces, taking care to not allow water into any openings. 12. INFORMATION ON DISPOSAL OF BATTERY AND PRODUCT Do not attempt to repair or adjust any of the electrical or mechanical functions of the unit. Remember to dispose of the product in an environmentally responsible way.
All rights reserved The features described in user’s manual are subject to modifications without prior notice.
Live Chat Support Learn more about ANMEATE, please visit us at https://anmeate.com Or Scan QR Code & Send to us scan me support@anmeate.com Printed in China www.anmeate.
