Installation Guide

Installation:
 Use 15 - 25 ft. flag poles with a 1/2"-thick rod at the top.
 Leave outdoors where the sun is fully unobstructed during the day.
 After the day charge, press the switch into “On” – This will turn on the auto-
on function.
 Remove the previous ornament from the top of the flagpole.
 Install Anley solar Led flagpole light and it will light up automatically at night
Kindly Remind:
 Pole, flag and top ball are not included.
 Please remove the film on the solar panel and push the switch to ON before
using. Be sure to turn the light "ON" via the ON/OFF button before installation.
 The LED light won't light up until night. If you want to test the product in
daylight, charge the product for a while first, cover the solar panels and turn
on the switch. Otherwise, the light will not turn on at all.