Application Guide

(1.) Make sure your phone is connected to 2.4GHz Wi-Fi. When your 2.4g Wi-Fi connected correctly to
your phone, your Wi-Fi name will be recognized by the camera and pop-up on the Wi-Fi selection
page automatically.
(2.) Allow your phone to forget your current 5G Wi-Fi connection from your phone's Wi-Fi menu to
disable auto-connection.
(3.) Adjust your phone to moderate brightness (not too light or too dark) so that the camera can read
the QR code clearly without reflections.
(4.) Put your phone, camera and router within 1.5ft to get a strong Wi-Fi signal strength.
(5.) If you choose to use the sound wave (audio pairing) method, please make sure your phone volume
is adjusted to maximum output and your router ID + password is no more than 32 digits.
If you're unable to pair the camera, please check the following suggestions below:
②. Sound wave configuration: In the "search device" page, adjust your phone's speaker
volume to Maximum to optimal output, and once paired successfully you will hear the
message: "Pairing Information Received".
Page 04