User Manual

Page 16 of 20
7.1 Rear Air Inlet Mesh Filter
• Clean the air cooler regularly, especially the rear air inlet mesh filter.
Do not allow this filter to become blocked.
IMPORTANT: Never spray with liquids or submerge the unit in water
or any other liquid.
Ensure that the fan is switched off from the supply mains before
removing the guard.
Do Not use flammable liquids, chemicals, abrasive creams, steel wool
or scouring pads for cleaning.
The rear air inlet mesh filter can be cleaned by using a vacuum cleaner
hose with a brush attachment.
IMPORTANT: Ensure the mesh is dry before vacuuming.
Alternatively, the Mesh Filter can be removed for washing. To do this,
pull the top of the Mesh housing out and then lift it up and out.
IMPORTANT: The Evaporative Paper Pad is attached to the inside of
the mesh filter so take care not to damage it as it is delicate.
• Wash the Mesh filter in clean cold water and a soft brush.
• The Evaporative Paper Pad will not require cleaning, other than a rinse
with clean cold water. Do Not brush or scrub the Evaporative Paper
Pad as you will damage it.