User Manual

Page 14 of 20
The fan will continue to run in the Low Speed Natural Mode until manually
turned off.
Note: To have the fan automatically turn off at your desired time in this
mode, use the “Timer” function to select the auto-off timer.
c. NAT: The “Natural” variable speed wind mode automatically selects one of
three variable speed wind speed patterns. Each Pattern produces a different
wind pattern depending on the Speed Setting Selected.
These Wind Patterns simulate the variable speed wind that you would
experience outdoors.
6.3 Fan Speed
• By default, when the unit is turned "ON", it starts at “Low” speed.
• Each press of the “FAN SPEED” button advances the Speed
setting as indicated by the lights above the “SPEED” button.
Continue to press the button to cycle around.
• Press the “ON/OFF” button to turn the appliance off.
6.4 Auto-Off Off Timer
• Use this power-saving feature if you want the appliance to turn off
automatically.
• To select the Off time, press the “TIMER” button once. It will
advance to 0.5h as indicated by the indicator lights above
the “TIMER” button. The cooler will turn off after
approximately 0.5 hours
• Each consecutive press will advance the timer at 0.5h increments until
it reaches a maximum time of 7.5h.
The time set will be indicated by the sum of the lights which are
illuminated. i.e. if the 0.5h + 2h + 4h lights are illuminated, this adds up
to be 6.5 hours. The cooler will turn off after approximately 6.5 hours
• To turn the timer off, or to reset to a new time, continue to press the
“TIMER” button until it cycles back around where no time lights are
illuminated.
• Press the “ON/OFF” button to turn the appliance off.