User Manual

Page 12 of 20
5 Controls
5.1 Evaporative Cooler
5.2 Remote Control
Note: 2 x AAA batteries are not included.
The Cooler comes with a remote control for your convenience.
The functions on the remote control are the same as the buttons
on the evaporative cooler.
To install the batteries, first remove the back of the remote
control by sliding the back battery cover off.
Insert the batteries inside the battery compartment matching
polarity icons with those in the battery compartment and then
refit the cover securely.
Battery Type: “1.5V 2 x AAA”
Do Not mix new and old batteries or batteries of different types (e.g., Alkaline
with Non-Alkaline) in the remote control.
To prevent corrosion, remove the batteries if the remote
control will not be used over a lengthy period.
The Remote Control can be stored in the top of the control
panel as shown.
Point the Remote Control at the control panel as this is the
location of the receiver, then press your desired button.