Blender WBL-2105 User Manual PLEASE READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT SAFEGUARDS When using any electrical product, always follow these basic safety precautions: READ ALL INSTRUCTIONS BEFORE USE. WARNING: 1. To protect against electrical shock, do not submerge the appliance or allow the power cord to come into contact with water or any other liquid. 2.
15. DO NOT use the appliance if blade assembly is bent or damaged. 16. To reduce risk of injury, never place the blade assembly on the base without the proper attachment. 17. DO NOT operate this appliance on or near any hot surface (such as gas or electric burner or in a heated oven). 18. The use of attachments or accessories not recommended or sold by the manufacturer may cause fire, electric shock or personal injury. 19. DO NOT remove the jug from the motor base while the appliance is running. 20.
33. To avoid damage or injury, please assemble the product correctly. 34. Make sure the blade is securely fastened to the accessories before assembling onto the motor unit. 35. Do not attempt to repair or disassemble the appliance. There are no user-serviceable parts inside. 36. Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to a sudden steaming. 37. Care shall be taken when handling the sharp cutting blades, emptying the jug and during cleaning. 38.
KNOW YOUR BLENDER 1 2 3 4 5 6 7 1. Motor base 2. Tall jug x 2pcs 3. Small jug 4. Grinding blade assembly 5. Blending blade assembly 6. Travel lid 7. Lip ring x2pcs IMPORTANT! Please make sure that your appliance is received with the right components shown above. Check everything carefully before use. If any parts are missing or damaged, do not use. Return the product to Kmart for replacement.
Place the motor housing on a flat, stable surface, the appliance is now ready for use. USE YOUR BLENDER WARNING! DO NOT process boiling liquids or hot ingredients. Allow hot ingredients to cool before placing them in the jug. IMPORTANT! DO NOT fill the jug above the maximum level mark indicated on the jug. Some mixtures increase in volume during blending and create pressure in the jug.
NOTE: The blender has a built-in safety lock feature, this ensures that you can only switch ON the appliance while the jug and the blade assembly are assembled on the motor base securely. IMPORTANT: In the base of each blade’s collar, there is a silicone gasket seal that creates an airtight fit with the jugs. After washing and before each use, always check to make sure the gasket is properly in place.
CLEANING AND STORAGE Clean the blender after each use. Remove the power cord from the power outlet socket and ensure the appliance is thoroughly cooled before cleaning. • Clean the motor base with a damp cloth or sponge. Wipe dry with a soft dry cloth. • Wash all the other parts except the motor base in warm, soapy water, and then rinse and dry thoroughly. Use caution when handling the blade assemblies as the blades are very sharp. CAUTION: Do not try to remove blades from the assembly for cleaning.
12 Month Warranty Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.
