User Manual

Cleaning & Maintenance
IMPORTANT! Clean the oven each time after use, this can avoid food residue and
oily juice from getting stuck on cavity wall, which may cause odour and hygiene
issues.
• Disconnect the power cord before cleaning.
• Always allow the appliance to cool down before cleaning.
•
DO NOT use hard or abrasive cleaning agents, or agents with high acidic/ alkaline
content.
• Do NOT use hard scouring pads. Clean the oven with a warm, moist cloth or and a
nonabrasive sponge with mild detergent.
•
Remove the mounting rail to clean the inner cavity. Steps to detach and refit the rail
as shown below.
• Clean accessories, including mount rail, with warm soapy water.
• Make sure all components are clean and dried thoroughly before storing.
• Store the appliance in a clean and dry location.
Detaching and refitting the mounting rails
WARNING – Risk of burns!
The rails become very hot. Always allow the appliance to cool down before detaching.
You can find rails fit on left and right side of the cavity wall.
Detaching the rails
1. Unscrew the top fixing screw.
2. Pull out the top part then lift the rail.
Refitting the rails
1. Reverse the steps of detaching the rails. Align the hooks at bottom of the rail with the
sockets on cavity wall.
2. Fixed the screw to lock the rail against the wall.