Manualshelf

User Manual

ManualsBrandsAnko Manualsair fryeranko SAT15003 Oven Air Fryer
11121314151617181920
Other Features
Self-Cleaning
For removal of odour and descale the vapor vent, it is recommended to do self-clean
regularly. A cleaning alarm is set in the oven, after 80hours of usage, the display will flash
with ‘CLER’. User shall carry out self-cleaning function to reset the time count.
The self-cleaning function will take approximately 60 minutes to complete the cycle.
Preparation
1. Detach the Mounting rail on both sides, wipe the oven walls with a soft cloth and warm
water. (For how to detach the Mounting rail, please refer to Clean and Maintenance
section)
2. Prepare detergent with approximately 20g of citric acid cleaner/ white vinegar dissolved
completely in 400ml of water, then pour the mixture into the water tank.
Start Cleaning
1. Press and hold the Self-Clean button to activate the cleaning procedure.
2. Display shows “CL:01”, indicating the first stage of cleaning procedure. At this stage,
the pump, pipes and cavity will be rinsed by the citric solution. This process lasts for
around 48min.
3. When stage 1 has ended, 3 beeps will sound and display shows “CL:02”, indicating
the second stage of cleaning.
4. Remove and empty the integrated water tank. Refill with clear water at room
temperature then re-install the water tank. The refill process needs to complete in 5
minutes, or the cleaning program will end automatically.
5. Press to start second stage cleaning procedure. All parts with be rinsed by clean
water. This process will last for around 5min.
6. The cleaning program will enter the last stage automatically. The display will show
“CL:03”and Air Fry function will start for drying the cavity.
7. When the cleaning process ends, there will be 3 beeps and the display shows “END”.
The oven will return to Standby mode.
NOTE: Steam oven cannot function until self-cleaning process is completed.
Interior lighting
Switches on the interior lighting during cooking, make it easier to check the food status.
Press button to turn on the light. Press again to turn off the light, or leave it for 30s,
the light will turn off automatically.
.