User Manual

OPERATION
Cook with Steam
There are two modes for cooking with steam: Steam cooking and Steam convection.
Steam cooking can keep foods soft and moist. It is suitable for vegetables, seafood and so
on. It is also well for to reheat ready meal or tin foods.
Steam convection combines the feature of steam and convection cooking. By adding
steam while cooking in Oven mode, allows to create fluffer cakes and juicier meats.
1. Fill the water tank with room temperature water before using. The max. water tank
capacity is
500ml.
2. Install the water tank, push it firmly towards the oven.
3. Place food tray and wire rack with food in the lower shelf position and close the door.
Then select the function desired.
4. Press button at to adjust desired temperature.
(NOTE: there is no temperature adjustment available for STEAM COOK function)
5. Press button at to adjust desired cooking time.
6. Press button. The cooking temperature and time appears in the display alternatively
and timer begins to count down.
7. You can change the time using button to do the adjustment.
8. If Refill Water icon is displayed, remove the water tank and fill it with water. Position
and push firmly into place. Press to resume the program.
9. At the end of the program, oven alert will sound.
10. After the oven is cooled, remove and empty the integrated water tank. Wipe the oven
cavity.
NOTE: Pay attention when heating soup, beverages, and other liquid foods. Heating
beverages will result in delayed splashing and boiling, so care must be taken when
taking them out.
Risk of Scalding! During and after steam heating, be careful of the
heat and vapor discharged. Be extremely cautious when opening the
oven door, as the oven may continue to emit hot steam.
Cook by Air Fry
The Air Fry mode provides an easy and healthier way of cooking by applying rapid air circulation
from all directions additional to a top grill. It can cook food crispy and brown.
1. Insert the food tray into middle or lower rack position. Arrange food evenly on the tray, place
food in a single layer and leave space between pieces.