User Manual

Use the Fan speed switch (5) to switch on the hair dryer and set fan speed.
Position O ------ OFF
Position ------Low fan speed
Position ------High fan speed
Adjust the Power Switch (4) to desired temperature.
Position ------ Low
Position ------ Medium
Position ------ High
Press and hold cool shot switch (3) to allow temporarily cool air.
When finished drying or styling, switch the appliance OFF, unplug the appliance and
allow it to cool before putting it down/storing.
CLEAN THE REAR GRILLE
If during use, the rear grille becomes clogged or blocked with dust or dirt, remove the
rear grille for cleaning.
Remove dust or dirt by using a dry brush.
The unit should be cleaned at least once a month.
Clean the appliance with a soft, slightly damp cloth. Make sure that no moisture has
entered the appliance during cleaning.
CLEANING AND MAINTENANCE
Attention! Turn off the appliance and disconnect the plug from the
power outlet before cleaning.
Attention! Do not use any alcohol, acetone, gasoline, abrasive cleaning agents, etc. to
clean the plastic components. Do not use hard brushes or metal objects for cleaning.
Risk of burning! Do not clean the appliance while still hot.
Wipe the appliance with a dry cloth.
Never submerge the appliance in water or let water run over the heating plates or
appliance.
Clean the air suction opening from time to time with a fine brush..
STORAGE
Store the appliance in a cool, dry location, away from children and pets.
If the appliance is not used for an extended period, store it preferably in its original
packaging.
After use do not wrap the cord around the appliance as this may cause the cord to
fracture. Coil cord loosely by the side of the appliance in storage.
DISPOSAL
Do not dispose this product with normal household waste collection. If unsure, contact
the local council waste management service for proper disposal facilities available for
your area.
TECHNICAL DATA
Voltage: 220-240V
Frequency: 50-60Hz
Power: 1600-2000W