User Manual

INTRODUCTION

Use this appliance to dry human hair only. Do not use this appliance on artificial hair or

animals. The appliance may have different results depending on the hair type. Therefore, we

recommend to do a trial at a hidden spot before first use. The hairdryer is not recommended

for damaged or bleached hair.

PARTS

1. Air outlet

2. Air inlet

3. Cool Shot Switch

4. Power switch

5. Fan speed switch

6. Hanging loop

7. Concentrator

8. Diffuser

BEFORE FIRST USE

• After unpacking the appliance, check for transport damage and that all the parts

mentioned in this manual are present. In the event of damaged or missing parts, return

the product back to Kmart.

• Do not discard the original box. It can be used for storage and dispatch to avoid

transport damage.

• Clean the appliance as described in CLEANING AND MAINTENANCE. For your safety

make particular attention to the IMPORTANT SAFEGUARD supplied in the user

manual.

OPERATION

• Fully unwind the mains cable. Make sure the Fan speed switch (5) is in OFF (0) position.

• Place the appliance on a smooth, flat, dry surface. Plug-in and switch on at the mains

supply.

• Fit the Concentrator or Diffuser if required by pressing it firmly into the Air Outlet.

• The Concentrator or Diffuser can be un-clipped if not required, but allow it to cool before

removing.