Window Vacuum Cleaner WHL-106 User Manual PLEASE READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT SAFEGUARDS When using any electrical product, always follow these basic safety precautions: READ ALL INSTRUCTIONS BEFORE USE. Warning: When using any electrical appliance, always observe basic safety precautions. The following instructions should be followed to reduce the risk of fire, electric shock or injury. General: 1. Read this manual carefully before using the appliance. Keep this manual in a safe place for future reference. 2. Use the appliance only as described in this manual. 3.
oil-based paint and varnish, flammable liquids and gases) for risk of an explosion. 15. Never immerse the device and/or the charger in water or other liquids. 16. Do not touch the charger with wet hands. 17. Never attempt to grasp an electric device if it has fallen in water or other liquids. 18.
KNOW YOUR WINDOW CLEANER 1, Wipe attachment Area 2, Squeegee 3, Spray 4, Water collection tank 5, Trigger 6, Clean water tank 7, Air outlet 8, Squeegee press-button 9, Vacuum switch 10, Handle 11, Battery level LED lights 12, Charger socket 13, Battery charger KH6-050100AU 3
BEFORE FIRST USE Fig.1 Fig.2 Fig.3 PLEASE INSERT SUCTION STRAINER BEFORE USING (Fig.1) Before use ⚫ ⚫ ⚫ Remove all packaging materials. Clean the device, if necessary, with a wet cloth and some mild detergent (also refer to “CLEANING AND STORAGE”). Check the device for any damage before each use. Do not use the device if the power cord or battery charger is damaged or when not functioning properly.
Note: The appliance must be disconnected from the charger when filling the water tank. Note: Do not add harsh cleaning materials, caustics, acids, scented perfumes, oils or cleaning products not intended for this type of cleaning to the water or the water tank as this may damage the unit or make it unsafe to use. Only use clear and purified water. The use of distilled water is recommended in areas with hard water to avoid lime scale deposits inside the product.
For maximum results, wipes should be replaced regularly according to their cleanliness. Wipes can be machine washed at 40℃. Do not put in dryer. Figure 1 Figure 2 USING YOUR WINDOW CLEANER Spray Hold the unit by the handle and press the water spray trigger (5) as show in Figure 3. Ensure the spray (3) is directed towards the area to be cleaned and cover the surface in water. Clean Then turn the device and wash the surface with either one of the wipes attached to the unit.
Warning: Do not spray on eyes or on electrical/electronic components, such as a plug, switch, cable, stereo, equipment, computer screens, household appliances etc. Warning: Use the vacuum function only to vacuum liquids used during the cleaning process Tip: With the use of the emery wipe the device does not need detergent, but in case of heavy dirt and grease a few drops vinegar can be added to the water to help degreasing and unclog your windows. This is an environment friendly and economic solution.
CLEANING AND STORAGE Cleaning the device 1. Turn the device off. 2. Lift the water tank cap, remove the filter and empty the water tank by turning the device upside down above the sink. 3. Clean the device and accessories with a damp cloth and a mild detergent and allow to dry completely. 4. Wash the filter carefully before placing it back in the unit. The collected water from the vacuum cleaner is recycled though this filter and it is therefore important that the filter is cleaned after each use.
12 Month Warranty Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.
