User Manual

DIGITAL SCREEN AND GENERAL OPERATION
Symbol:
Function:
1. Temperature Indicator &
Time Indicator
2. ON/OFF
3. Frost Protection
4. Auto Mode
5. Low Heat Output (1000W)
6. High Heat Output (2000W)
7. Timer
8. Fan system
REMOTE CONTROL
1. Install two "AAA" batteries into remote control.
2. All functions performed with remote control work identically to the manual controls.
3. Remote control should be aimed at the digital display to be received by the heater.
NOTE:
• Batteries not included.
• When there is an obstacle between the heater and the transmitter, the heater may
not operate.
• When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong
light shines on the REMOTE SENSOR of the unit, the operation of remote control may
be unstable.
FOOT ASSEMBLY
The device must be installed so that airflow is not obstructed.
• Carefully turn the unit upside down. Use the Screws to fix the Feet onto the Heater.
Take care to ensure that they are located correctly at the bottom ends of the heater
side molding.
• Be sure to place the convection heater on a flat surface.