Convection Heater DL05L-F User Manual PLEASE READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using the appliance. 2. To avoid fire or shock hazard, plug the appliance directly into a 220-240V AC electrical outlet. 3. DO NOT use external timer, separate remote control system, and extension cable or external adaptor is not recommended with the appliance. 4.
19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. Use appliance only for intended household use only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by the manufacturer cause hazards. This appliance is designed for indoors ONLY. DO NOT use outdoors.
PRODUCT SPECIFICATION PACKAGE CONTENTS 1 Main Unit 1 Instruction Manual 2 Moulded Feet 8 Screws for foot assembling 1 Remote Control NOTE: Confirm all parts before disposing of carton. Safely dispose of all plastic bags and other packaging components. They may be potentially dangerous to young children. REMOTE CONTROL AND GENERAL OPERATION 1. ON/OFF Button 2. Fan system 3. Low Heat Output (1000W) / High Heat Output (2000W) / Auto mode / Frost Protection mode 4. Timer 5.
DIGITAL SCREEN AND GENERAL OPERATION Symbol: Function: 1. Temperature Indicator & Time Indicator 2. ON/OFF 3. Frost Protection 4. Auto Mode 5. Low Heat Output (1000W) 6. High Heat Output (2000W) 7. Timer 8. Fan system REMOTE CONTROL 1. Install two "AAA" batteries into remote control. 2. All functions performed with remote control work identically to the manual controls. 3. Remote control should be aimed at the digital display to be received by the heater. NOTE: • Batteries not included.
DIGITAL SCREEN AND REMOTE CONTROL OPERATION THIS APPLIANCE MUST BE EARTHED. • Ensure the ON/OFF control switch is in the OFF (position ‘0”) position before connecting to mains power. • Make sure the appliance, including the plug and cord, is not damaged. • Insert power plug into a wall socket with correct power output, 220-240V 50Hz. The buttons of touchscreen located on the product correspond to the remote control functions. The digital screen operation: 1.
IMPORTANT! After setting, the shown temperature on the display screen is the ambient temperature. The heater will start to function only when the set temperature is higher than the ambient temperature. 4. Timer setting: Timer can be set from 1h - 24h. will flash, press buttons " " " " to select the Press the Timer button " ", the icon desired range between 1 to 24 hours. The timer will increase or decrease by 1 hour after each press.
- Dry the unit completely with a dry cloth. IMPORTANT! Check for damage - Always check that the appliance is in good working order, there is no damage visible and all parts are secure. - Check the power supply cord and plug regularly for cuts or damage. If any damage is visible on the product, DO NOT use the heater. Store in a safe place - When not in use, disassemble and store your appliance and instruction manual in a safe and dry place away from moisture and heat.
12 Month Warranty Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.
