Tus neeg siv phau ntawv
Table Of Contents
- KNOW YOUR ESPRESSO COFFEE MAKER
- FROTHING MILK
- 1. Turn the Steam Controller all the way to “OFF” position to close the steam nozzle.
- 2. Use the handle to turn the milk frother out to the side of the machine.
- 3. Press the Steam button “”, and the Steam indicator light will start flashing.
- 4. Wait until the Steam indicator light stop flashing.
- 5. Fill approx. 100ml of cold milk in milk jug. Ideally, a milk jug is made of stainless steel.
- 6. Pick up the milk jug and guide the nozzle of milk frother and immerse it lightly into the milk.
- 7. Hold the milk jug at a slight angle and turn the Steam controller to the “/” position.
- 8. Move the milk jug up and down slightly, but ensure the nozzle is always immersed in the milk.
- 9. Once you have created sufficient milk froth, close the Steam controller and place the milk jug aside. Wipe the nozzle with a clean damp cloth.
- 10. Press the Power button to turn OFF the machine.
- After milk frothing, the steam nozzle must be cleaned. Not doing so may result in steam blockage.
- Press the power button “” to turn off the machine.
- Pull the power plug off from the mains power outlet socket.
- Allow the machine cool down for a few minutes.
- Quick clean
- Wipe all parts with a damp soft cloth, such that coffee grounds and milk residues do not dry on the machine.
- Empty the drip tray
- The drip tray needs emptying as soon as the red overfill indicator pops up.
- Carefully lift the drip tray off the espresso machine, remove the draining rack and pour the water into the sink.
- Dispensing amount for a single-cup
- Dispensing amount of double-cup
- Restore factory setting
- After pressing the power ON button, if there is no function selected within 29 minutes, the unit will power off automatically.
- After pressing the power button, if there is no function selected after the water pump has operated for more than 180 seconds during frothing, the pump will stop automatically.
Descaling
Descale the coffee maker regularly. To do this, use a commercially available descaling product (kettle
descaling solution) and follow instructions provided with product.
Storage
1. Prior to longer storage, clean the espresso machine thoroughly.
2. Empty the water tank and the drip tray.
3. Allow all parts to dry completely.
4. Store the espresso machine in a dry, frost and dust free location.
TROUBLE SHOOTING
Symptom
Cause
Corrections
Water leaks from the
bottom of coffee maker.
There is too much water in the
drip tray.
Please empty the drip tray.
The coffee maker has
malfunctioned.
Contact Kmart customer
service.
Water leaks out of outer
side of filter.
There is some coffee powder on
filter edge.
Clean the edges on the filter
before installing onto the
coffee machine.
Acid (vinegar) taste exists
in Espresso coffee.
The coffee powder is stored in a
hot, wet place for a long time.
This can cause coffee powder to
turn bad.
Always use fresh coffee
powder, or store unused
coffee powder in a cool, dry
place. After opening a
package of coffee powder,
reseal it tightly in an airtight
container and store it in a
refrigerator to maintain its
freshness.
The coffee maker does not
work.
The white indicator is not
illuminated.
Only after the white indicator
is illuminated, the steam can
be used make coffee or froth.
The steam doesn’t froth
properly.
The container is too big or the
shape does not fit.
Use high and narrow cup to
make froth.
You have used skimmed milk.
Use whole milk or half-
skimmed milk
Make hot water and the knob
has not reset after cooling down.
Rotate the knob to off position