User Manual

Page 10 of 16
5.3 Attaching the Massage Heads
If you are not using the Heating Function, you can attach the Massage Heads for
your particular area of massage.
To do this, ensure the massager is not being charged and that it is turned off, then
turn the massager upside down so that the Massage Domes are pointing up.
Select the massage head required, and place it on top of the Dome ensuring the
two locking tabs inside (underneath) the massager’s head is aligned with the
grooves and slots in the dome.
Repeat on the other dome and then push the Massage Heads all the way down
then rotate clockwise to lock them in place.