User Manual

Directions for Use
1. Unscrew the battery covers with a screw driver (not included), insert 2 new 1.5V AA size
batteries (not included) and tighten the screws with a screw driver (not included). Please
ensure that batteries are inserted with correct polarity.
2. Turn the power switch to the “on” position and place the device on the floor. To preserve
battery life, turn the switch to the “off” position when it is not in use.
3. Press the power button to activate the teasing tail. The teasing tail will quickly rotate in
random directions for 10 minutes then go into sleep mode; if you press the power button in
the active mode, the tail will stop working. Press the power button to reactivate it in the sleep
mode.