Cat Toy Mouse Chaser Dome Contains non-replaceable batteries
Product Overview Tech Specs Battery Type 2 x 1.
Directions for Use 1. Unscrew the battery covers with a screw driver (not included), insert 2 new 1.5V AA size batteries (not included) and tighten the screws with a screw driver (not included). Please ensure that batteries are inserted with correct polarity. 2. Turn the power switch to the “on” position and place the device on the floor. To preserve battery life, turn the switch to the “off” position when it is not in use. 3. Press the power button to activate the teasing tail.
. Pull out the insulation chip and pat the squeaky mouse toy, and the mouse will squeak to entice your cats. In the event that the Mouse Chaser Dome Stops Working • • • • Restart the device. Check if the batteries have run out of power. Make sure batteries are properly installed. Replace batteries when required. Warning 1. Please use in clean and safe environment and keep it away from water, fire, high temperature and dirty place. 2. Battery usage and maintenance.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are only to be charged under adult supervision. Rechargeable batteries are to be removed from the pet toy before being charged. The supplier terminals are not to short-circuited. Remove the batteries from the pet toy when not in use for extended time or when batteries become exhausted. Battery installation by adult required. Dispose of batteries responsibly. Do not dispose of in fire. 2.
