User Guide

Installation Tips
A simple guide
to start using your
314L Top Mount
Refrigerator Freezer
First Use
Need Help?
For all questions or customer support
please contact us using the details below.
Phone [phone] (Australia)
Online www.kmart.com.au
Product Specifications
Capacity 314L
Dimensions (w,d,h) 595 x 695 x 1620mm
Net Weight 55kg
MEPS 3 Stars
Temperature Control
When starting up for the first time, keep the
refrigerator still for 2 hours before connecting
it to power supply.
Before putting any fresh or frozen foods in the
fridge, ensure the fridge has run for 2–3 hours,
or for at least 4 hours in summer when the
ambient temperature is high.
The temperature controls are located on the
inside of the fridge.
Use the SETTING button (A)
to cycle through the temperature settings from
COLD (1) to SUPER COOL (4).
• 1: The warmest temperature setting
• 2–3: Normal operation
(adequate for most situations)
• 4: Super Cool is used to get to a colder
temperature in a quicker time frame
Two person installation: Use two or more
people to move and install the appliance.
Failure to do so can result in back or
other injury.
Freestanding design: This appliance
is designed to be freestanding only,
and should not be recessed or built-in.
Floor surface: This appliance must be
properly positioned on a dry, sturdy, level
surface that is strong enough to support it
when it is fully loaded.
Ambient temperature: The ambient
temperatures must correspond to the climate
class ( T ) indicated on the rating plate of the
appliance: 16° C – 38° C.
Clearances: Ensure that air can circulate
freely around the back of the cabinet, which
is necessary to cool the compressor and
condenser. Allow at least 10cm clear space
at the back, 10cm at the sides of the unit and
30cm between the top and any surface above.
If you are installing your refrigerator next to a
fixed wall, leave sucient space on the hinge
side to allow for the door to swing open.
Note: For further installation instructions please refer to the user manual.
1
2
3
4
A