Phau Ntawv Qhia

Operating your Heater
Always choose a safe location for the heater, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. Please follow the
below instructions.
WARNING: In order to avoid overheating or fire, do not cover the heater.
WARNING: Keep all objects at least 1 metre from the front, sides and rear of the
appliance.
WARNING: Do not use this heater with a programmer, separate timer, remote-control
system or any other device that switches the heater on automatically, since a fire risk
exists if the heater is covered or positioned incorrectly.
WARNING: Never leave this heater unattended when in use.
Ensure heater is on a flat, stable, heat-resistant surface.
Once the heater is in a safe operating position and all switches are in the off position, insert
the power plug into the mains outlet and switch on.
CAUTION: Ensure the power cord is not tight because if pulled it may partially pull the
plug from the socket. A partially inserted plug will overheat the plug and socket and could
result in fire.
HEAT SETTING SWITCH
0 Off
I Low Heat
II Medium Heat
III High Heat
Check that the power On/Off switch is set to Off position before plugging the heater into the
mains supply. For greater economy, use the High Heat setting initially and then switch to the
Low Heat setting.
THERMOSTATIC CONTROL
1. Rotate thermostat knob clockwise until you reach the maximum position.
2. When the room reaches a temperature that is comfortable for you, slowly turn
the knob anti-clockwise until the heater just turns off (you will hear a click).
3. The heater will now cycle on and off to maintain the comfort level you have set.
HEAT SETTING SWITCH
THERMOSTATIC CONTROL