Manualshelf

Instruction Manual

ManualsBrandsAnko ManualsOtheranko 4K Digital Action Camera
12345678910
SETUP & OPERATION
Charging the batteries
1. Plug the Micro USB end of the supplied Micro USB cable into the Micro USB Port of the camera
2. Plug the Standard USB end into a USB wall charger.
3. The charging indicator red LED light will flashing. When the battery is fully charged the charging
indicator light will stay on.
Inserting a MicroSD card
The HD Action Camera does not have any internal memory. A MicroSD card (not included) is
required for the HD Action Camera to record footage and capture images.
1. While the HD Action Camera is off, insert a MicroSD card into the port on the side of the HD
Action Camera and push the card all the way into the port. When correctly inserted
and fully inside the body of the HD Action Camera, you will feel a small click. Your HD Action
Camera is now ready to record and capture images.
( NOTE: Please format your MicroSD card to avoid no enough space.)
2. To remove the MicroSD card, push the card in slightly until you hear a click, the card will then
pop out from the HD Action Camera for removal.
Powering the HD Action Camera on and off
1. Ensure a fully charged battery is inserted into the HD Action Camera
2. Turn the camera on by long pressing the Power/ Mode button.
3. Press the Power/ Mode button to cycle through Modes as explained below
4. To turn the HD Action Camera off, long press the Power/ Mode button for 3 seconds.
MODE SELECTION
There are five different modes available for your HD Action Camera
Video Mode Records video clips
Photo Mode Takes photos
Slow motion Mode Record video clips with slow motion
Playback Mode Plays your recorded files and photos
Setting Mode Manage your camera setting.
Video mode
1. Quick press Power/ Mode button until you see the
2. To start recording, short press the shutter button,then the blue LED indicator light will flashing .
Video settings
1. Press power/mode button to setting mode,press shutter button to access video setting menu
2. To cycle through the settings, short press WiFi button.
3. To select a setting, short press the shutter button