Phau Ntawv Qhia

Step 11

Step12

Tighten all screws on slide frame with spanner (a) and hexagonal key (b). Fix anchor into ground as

shown in the image below.

Cover the ends of the cross bar ( I and J) with plastic cover (j), connect the cross bar (I) and slide support

leg (E and F) by ﬁxing with M8*24mm screw sets (e), align the hole of the handrail with the support leg.

Connect the crossbar (J) to the slide support leg (E and F) and the handrail (D) with M8*24mm screw sets (e).

M8*24mm M6*12mm