User Manual

Operation Instructions:
1. Connect USB power adapter (included) to socket while connect the USB-C cable (included) to the USB-C
port of the charging stand. The RGB light will turn on.
2. Place wireless charge enabled smartphones on wireless charging pad. LED light turn into white to start
charging.
3. If the charging position is improper or low power input (less than 5V 2A), the white LED light will flashing.
4. Check the charging icon displayed on the mobile phone’s screen for the charging status.
5. The hidden silicones can be manually adjusted front and back, you can place your phone in vertical or
horizontal position.
RGB LED Light Mode (Control button only to control the RGB light)
Rolling mode ➨Breathing mode ➨Fix color mode
1. RGB LED light slow rolling mode at the beginning when connecting to USB power adapter.
2. Short press the button to different light modes. Slow rolling mode -> Fast rolling mode ->
Slow Breathing mode -> Fast Breathing mode ->Fix color mode: Red -> Green -> Purple -> Blue -> Yellow
3. Long press the button to turn off the RGB light.
Specification:
Input: DC 5V 2A / 9V 2A/ 12V 2.2A
Output: 15W Max